Don't Replace that Sign, Just Clean It!
How to remove Graffiti from traffic signs
|
5 Simple DIY Steps to Remove Graffiti from Traffic Signs. Traffic Signs are very delicate so extra care needs to be taken to remove the graffiti tag without damaging the delicate signage. Anti-Graffiti Films protect signage substrates and allow graffiti to be easily removed. Step 1: Spray Clean City Pro Green Label Graffiti Remover or Clean City Pro Yellow Label Graffiti Remover. Step 2: Allow short dwell time of 10 to 30 seconds. Step 3: Swirl gently with soft rag or paper towel. Step 4: Wipe surface clean with dry, absorbent rag. Step 5: For the best results, rinse with water or wipe down with wet rag. Repeat as necessary. Note: For traffic signage protected with a anti-graffiti coating such as 3M Anti-Graffiti Film or Avery Denison Anti-Graffiti Film, Clean City Pro Red Label Graffiti Remover can be used without fear of damaging the underlying delicate substrate. 
|
|
|
|
|
|
Best Graffiti Remover for Traffic Signage.
Medium Duty Green Label and Light Duty Yellow Label are recommended for unprotected signs.
Heavy Duty Red Label is recommended for signs protected by an anti-graffiti protective film.
Medium Duty Green Label and Light Duty Yellow Label are recommended for unprotected signs.
Heavy Duty Red Label is recommended for signs protected by an anti-graffiti protective film.
Clean City Pro Green Label Medium Duty Graffiti Remover
$22.99 - $259.99
Clean City Pro
Green Label Medium Duty Graffiti Remover
Removes Spray Paint and Permanent Marker from Painted Metal, Plastics, Vehicles and a Wide Range of Smooth Surfaces
Green Label Medium Duty Graffiti Remover
Removes Spray Paint and Permanent Marker from Painted Metal, Plastics, Vehicles and a Wide Range of Smooth Surfaces
